Product Features
High protective performance, sturdy and durable
Information visualization digital display panel, more convenient to operate
- 4KHz Ultra fast sampling speed, 0.05% F.S., ultra-high linear accuracy, 0.1μ M repetition accuracy
- 01
- adopts optical basic compression modules, with IP67 protection level, sturdy and durable
- 02
- Organic OLED information visualization digital display panel, more convenient to operate
- 03
- Wide measurement range, available in multiple models from 26mm to 1000mm
- 04
High protective performance, sturdy and durable
PDM The series adopts optical basic compression modules, effectively avoiding measurement errors caused by foundation deviation. IP67 protection level, effectively preventing water droplets, dust and other pollutants from entering, sturdy and durable.
Information visualization digital display panel, more convenient to operate
adopts high-performance OLED display panel, supporting data display and light waveform display at the same time, and multiple detection modes are suitable for more applications.
Wide measurement range
Long distance measurement model PDM-600, with a measurement range of up to 600± 400mm, even if the measured object is replaced, there is no need to adjust the installation height of the sensor.
| 型号 | 宽光点 | PDM-030-A | PDM-050-A | PDM-085-A | PDM-120-A | PDM-030-485 | PDM-050-485 | PDM-085-485 | PDM-120-485 |
| 聚焦光点 | PDM-030S-A | PDM-050S-A | PDM-085S-A | PDM-120S-A | PDM-030S-485 | PDM-050S-485 | PDM-085S-485 | PDM-120S-485 | |
| 输出类型 | 模拟量输出 | RS485输出 | |||||||
|
测量中心距离
|
30mm
|
50mm
|
85mm
|
120mm
|
30mm
|
50mm
|
85mm |
120mm
|
|
| 测量范围 | ±4mm | ±10mm | ±20mm | ±60mm | ±4mm | ±10mm | ±20mm | ±60mm | |
| 重复精度 | 0.25μm | 0.5μm | 1μm | 2μm | 0.25μm | 0.5μm | 1μm | 2μm | |
| 线性精度 | ±0.05% F.S. ( F.S.=8mm ) |
±0.05% F.S. ( F.S.=20mm ) |
±0.05% F.S. ( F.S.=40mm ) |
±0.1% F.S. ( F.S.=120mm ) |
±0.1% F.S. ( F.S.=8mm ) |
±0.1% F.S. ( F.S.=20mm ) |
±0.1% F.S. ( F.S.=40mm ) |
±0.1% F.S. ( F.S.=120mm ) |
|
|
光源
|
红色半导体激光；最大输出: 1mW、发光波峰波长: 655nm
|
||||||||
|
响应时间
|
0.25/0.33/0.5/1/2/4/8/16 ms
|
||||||||
|
激光等级
|
2类( Class2 )
|
||||||||
| 通信规格 | —— | RS485半双工 | |||||||
| 外部输入功能 | 触发上传 | ||||||||
| 模拟 输出 |
电流 | 输出4-20mA，容许负载电阻300Ω以下 | —— | ||||||
| 电压 | 0-5V，输出阻抗100Ω | —— | |||||||
| 开关量输出 | 集电极开路输出 ( NPN或PNP ) ，Max100mA / DC 30V，残留电压1.8V | ||||||||
| 电源电压 | 12V~ 24V DC±10%，( 脉动P-P 10%以下 ） | ||||||||
| 消耗电流 | 100mA以下 | ||||||||
| 保护电路 | 逆反接保护、过流保护、短路保护 | ||||||||
| 耐环 境性 |
防护等级 | IP67（ IEC ） | |||||||
| 使用环境温度 | -10℃~+50℃(注意不可结露、结冰)，存储时：-20℃~ +60℃ | ||||||||
| 使用环境湿度 | 35%RH~85%RH，存储时：35%RH~85%RH | ||||||||
| 耐环境光 | 白炽灯： 受光面照度3000lx以下 | ||||||||
| 耐振动 | 频率10Hz~55Hz，双振幅1.5mm，X、Y、Z各方向2小时 | ||||||||
| 耐冲击 | 加速度500m/s² ( 约50g )， X、Y、Z各方向3次 | ||||||||
| 材质 | 压铸铝 | ||||||||
| 型号 | 长距离检测 | PDM-250-A | PDM-350-A | PDM-600-A | PDM-250-485 | PDM-350-485 | PDM-600-485 |
| 输出类型 | 模拟量输出 | RS485输出 | |||||
|
测量中心距离
|
250mm
|
350mm
|
600mm
|
250mm
|
350mm
|
600mm
|
|
| 测量范围 | ±150mm | ±250mm | ±400mm | ±150mm | ±250mm | ±400mm | |
| 重复精度 | 5μm | 10μm | 5μm | 10μm | |||
| 线性精度 | ±0.2% F.S. ( F.S.=300mm ) |
±0.3% F.S. ( F.S.=500mm ) |
±0.15% F.S. （测量距离 200~600mm） ±0.25% F.S. （测量距离 600~1000mm） ( F.S.=800mm ) |
±0.2% F.S. ( F.S.=300mm ) |
±0.3% F.S. ( F.S.=500mm ) |
±0.15% F.S. （测量距离 200~600mm） ±0.25% F.S. （测量距离 600~1000mm） ( F.S.=800mm ) |
|
|
光源
|
红色半导体激光；最大输出: 1mW、发光波峰波长: 655nm
|
||||||
|
响应时间
|
0.25/0.33/0.5/1/2/4/8/16 ms
|
||||||
|
激光等级
|
2类( Class2 )
|
||||||
| 通信规格 | —— | RS485半双工 | |||||
| 外部输入功能 | 触发上传 | ||||||
| 模拟 输出 |
电流 | 输出4-20mA，容许负载电阻300Ω以下 | —— | ||||
| 电压 | 0-5V，输出阻抗100Ω | —— | |||||
| 开关量输出 | 集电极开路输出 ( NPN或PNP ) ，Max100mA / DC 30V，残留电压1.8V | ||||||
| 电源电压 | 12V~ 24V DC±10%，( 脉动P-P 10%以下 ） | ||||||
| 消耗电流 | 100mA以下 | ||||||
| 保护电路 | 逆反接保护、过流保护、短路保护 | ||||||
| 耐环 境性 |
防护等级 | IP67（ IEC ） | |||||
| 使用环境温度 | -10℃~+50℃(注意不可结露、结冰)，存储时：-20℃~ +60℃ | ||||||
| 使用环境湿度 | 35%RH~85%RH，存储时：35%RH~85%RH | ||||||
| 耐环境光 | 白炽灯： 受光面照度3000lx以下 | ||||||
| 耐振动 | 频率10Hz~55Hz，双振幅1.5mm，X、Y、Z各方向2小时 | ||||||
| 耐冲击 | 加速度500m/s² ( 约50g )， X、Y、Z各方向3次 | ||||||
| 材质 | 压铸铝 | ||||||
